BHM
12/12/16
NTV-DOC276
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
6 |
P a g e
AUDI-VC Operation
If a rear camera was installed, placing the vehicle in reverse will show the connected
camera’s image, with dynamic guidelines for convenience.
In order to use HDMI on the cluster, you must
begin in Navigation mode on the cluster.
See below for activating HDMI or additional video inputs:
Additionally, sending 12v (+) to the
green wire
through a toggle will force the
‘CAMERA’
or
‘CVBSIN’
video signal, selectable via the OSD menu. See page 8 & 9.
*Note: These features will only function when active (see OSD Menu settings & Dip Switch
settings)
With Dip Switch #3 DOWN:
Press & hold
BACK ARROW
(2 seconds) to cycle
through installed & active video input options. Order:
OEM-AV1-AV2-AV3-HDMI-OEM
With Dip Switch #3 UP:
Press & hold
LEFT TAB (2 seconds)
to cycle through
installed & active video input options. Order:
OEM-AV1-AV2-AV3-HDMI-OEM
Steering Wheel
HOLD 4 Seconds
to change current
screen in AUDI Virtual Cockpit
Cluster from middle to full-size