BHM
12/12/16
NTV-DOC276
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
5 |
P a g e
8.
Connect the video feed from the camera to the RCA among the main power harness
labeled ‘CAMERA’.
9.
Connect the white plug from the
Power/CAN Harness
to the port on the AUDI-VC
interface labeled
‘POWER CAN’
.
10.
Connect the HDMI Cable
(not provided)
from the HDMI
source to the
HDMI-IN
port on the AUDI-VC.
a.
If using HDMI, audio is extracted from the
module via the provided
Audio Output Cable
from the port on the interface labeled ‘
HDMI
AUDIO OUT’.
Connecting this signal to the vehicle
often requires the MMI-AUX adapter
(part # 4F0051510T).
11.
Optional:
If adding an additional composite video input (including front camera), connect
the video signal to the RCA among the Power/CAN Harness labeled ‘CVBSIN’
.
12.
Optional:
Powering (12v) the
green wire
through a toggle switch (not included) (connect
to ‘
CAN2’
on interface) can be set to show either the
‘CAMERA’ RCA
or
‘CVBSIN’
RCA at
will. See OSD Menu settings (page 9 & 10) to adjust
‘REVERSE LINE’
.
13.
Start the car and test for proper functionality before replacing any dash pieces.