36
Note:
Your machine may not match the image. For reference only.
1. Press the edges of the Console Pivot Shroud to disen-
gage the tabs from the Console. Remove the Console Pivot
Shroud and set it safely aside.
2. Remove screws that attach Console to the Mast. Care-
fully lift the Console off the Mast.
3. Disconnect the Data Cable, Heart Rate Cable and Re-
sistance Cable at the top of the Mast. Set the Console and
screws safely aside for reassembly.
Note:
Do not let the cables fall down inside the Mast. This
step may require two people.
4. Remove the Handlebar Bracket Cover and set it safely
aside for reassmbly.
5. Tie the length of string to the end of the Heart Rate
Cable and Resistance Cable at the top of the Mast. Grasp
the section of HR Cable and Resistance Cable under the
Handlebar Bracket and carefully pull the cables and string
down through the Mast and out of the hole so that the string
extends through the Mast and Handlebar Bracket.
Note:
Do not let the Data Cable fall down inside the Mast.
Disconnect all power to the machine before you service it.
