background image

28

Decrease (

) button- Decreases the current value, or moves through the options available

Right (

) button- Shifts the currently active segment, and moves through options

PROGRAMS button- Selects a category of workout programs 

Pre-Set Incline buttons- Selects an incline value for the Walking Deck. After pushing a Pre-Set Incline button, push the 

Incline Enter button within 12 seconds for the Walking Deck to be adjusted to the desired incline.

Incline Enter button- Activates the incline motor to adjust the Walking Deck to the selected Pre-Set Incline value.

START button- Begins a Quick Start workout, begins a Program Workout after customized for the User, or resumes a 

paused workout.

FAN button- Controls 3-speed fan

PAUSE / STOP button- Pauses an active workout, ends a paused workout, or 

exits to the previous menu

Pre-Set Speed buttons- Selects a speed value for the Walking Belt. After pushing a Pre-Set Speed button, push the 

Speed Enter button within 12 seconds for the Walking Belt to be adjusted to the desired speed.

Speed Enter button- Adjusts the speed of the Walking Belt to the selected Pre-Set Speed value.

LCD Display Data

Program Profi le Display

The Program Profi le Display shows the course profi le for the workout program. A course profi le has 16 columns, or 

segments. The course profi le has two variables for each segment: incline (hexagons, upper) and speed (arrows, lower).
The more intense the incline or speed setting, the higher the level for that segment. The fl ashing segment shows your 

current interval.

Heart Rate Zone Display

The Heart Rate Zone shows which zone the current heart rate value falls into for the current User. These Heart Rate 

Zones can be used as a workout guide for a certain target zone (max, anaerobic, aerobic, fat burn, and warm up).

Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in 

your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. 

Use the values calculated or measured by the machine’s computer for reference purposes only. The heart 

rate displayed is an approximation and should be used for reference only.

Note:

 If no heart rate is detected, the Heart Rate Zone display will be blank. 

Active User Display

Option Guides

Workout Category

Program Profi le 

Display

Heart Rate 

Zone Display

Summary of Contents for T616

























































Reviews: