Nautilus StairMaster ClubTrack 2100 Series, Service Manual

Page: 30 / 92

26
ClubTrack
®
2100 Series Treadmill Service Manual
Table 2–33. Serial Tests
Step No. Press Keys On Console Display (What you will see)
1 CLEAR, 6, 2 SERIAL TESTS
2 ENTER RUNNING, PASS, or FAIL
3 CLEAR DIAGNOSTIC
4 CLEAR THE RESULTS YOU WANT
Table 2–34. Bus Volts
Step No. Press Keys On Console Display (What you will see)
1 CLEAR, 6, 8 BUS VOLTS
2 ENTER BUS VOLTS xxx (where “x” is the
drive board bus voltage reading)
3 CLEAR TWICE THE RESULTS YOU WANT
Table 2–35. Grade Act
Step No. Press Keys On Console Display (What you will see)
1 CLEAR, 6, 9 GRADE ACT
2 ENTER GRADE ACT x.x (where “x” is the
actual grade setting)
3 CLEAR TWICE THE RESULTS YOU WANT
Diagnostic 2
The DIAGNOSTIC 2 settings allow you to view the machine’s error log and reset or change the maintenance hours
between service calls.
To scan through and change the owner-defined codes, perform the following steps:
Table 2–36. Diagnostic 2
Step No. Press Keys On Console Display (What you will see)
1 CLEAR, 7, ENTER DIAGNOSTIC 2
2
INCLINE UP or INCLINE DOWN
ERROR LOG, MAINT HOURS
3 ENTER (not necessary for
maintenance hours)
Selects the option you want and
displays the results
4
INCLINE UP or INCLINE DOWN Error codes
5 CLEAR DIAGNOSTIC 2
6 CLEAR THE RESULTS YOU WANT
To view a particular machine status without having to scan through all the choices, perform the following steps for
that listed option:
Diagnostic 2