background image

Page 2

 

 WARNING: 

 to reduce the risk of serious injury to 

persons using this equipment, read and follow all of 
these warnings:

24 in (0.6 m)

Fig. 1

 Required Clearance Example (Pull Down Shown)

1. 

Assemble and operate the unit on a solid level 
surface. Position the machine with a minimum of 
24 inches (0.6 meters) of clearance on one side to 
allow for ease of mounting and dismounting. Leave 
a minimum of 19.7 inches (0.5 meters) between 
two adjacent units. These dimensions are the 
recommended minimum distances.  
 
The actual area for access and passage shall be 
the responsibility of the facility and should take 
into account this training envelope, Americans with 
Disabilities Act Accessibility Guidelines (ADAAG) 
requirements and any required local codes or 
regulations (www.access-board.gov/ada).

2. 

This equipment is designed for use in a 
commercial gymnasium or health club. To ensure 
the proper use of the equipment in a safe manner, 
all users of the equipment should read this manual 
before using the machine. This machine should 
be made a part of your club training program in 
order that the equipment is used by your members 
in a safe manner as intended. In addition to 
instructing the club members in the proper use of 
the equipment, the club member should obtain a 
complete physical examination form their health 
care provider before beginning any exercise 
program.

3. 

The safety and integrity of this machine can only 
be maintained when the equipment is regularly 
examined for damage and wear and repaired. 
It is the sole responsibility of the owner of this 
equipment to ensure that regular maintenance 
is performed. Worn or damaged parts must be 
replaced immediately or the equipment removed 
from service until the repair is made.

4. 

Do not exceed the maximum allowable weight limit 
of:

•  350 lbs. (160 kg.)

5. 

Use only replacement components supplied by 
Nautilus®. Substitutes are forbidden and will void 
all warranties. 

6. 

This machine is not intended to be used by 
persons with reduced physical, sensory, or mental 
capabilities or lack of experience and knowledge, 
unless given instruction and under the personal 
supervision concerning use of the machine by a 
person responsible for their safety.

7. 

Keep children away.

Before using this product, it is essential to read the ENTIRE Owner’s Manual and ALL 
installation instructions. The Owner’s Manual describes equipment assembly and instructs 
members on how to use correctly and safely.

Read all warnings posted on the machine.

Health related injuries may result from incorrect or excessive use of exercise equipment. 
Core Health & Fitness strongly recommends you to encourage your members to discuss their 
health program or fitness regimen with a health care professional, especially if you or they 
have not exercised for several years, are over 35, or have known health conditions.

 WARNING! 

IMPORTANT SAFETY 
INSTRUCTIONS

Summary of Contents for ONE CP02





























Reviews: