ASSEMBLY INSTRUCTIONS
STEP 3: Installing Boot Shroud and
Handlebar Mast
Slide the boot shroud (13) up the handlebar mast (7). This part will be secured in
place last.
Plug the upper speed sensor wire (9) into the lower speed sensor wire (11). Plug the
upper heart rate wire (32) into the lower heart rate wire (8).
Attach the handlebar mast (7) to the main frame (1) with 6 – 15mm socket head
cap screws (12), 6 – spring washers (4) and 6 – washers (5). Be careful not to dam-
age or pinch wires while assembling.
Lower the boot shroud (13) and secure with 6 – 12mm flat head screws (14).
