Nautilus NH-1800 Operator'S Manual Download Page 22

Page: 22 / 182

NH-1800

4. Installation

4-2

4. Installation

4.1 Installation Requirements and Necessary Tools

Installation condition and space

Following conditions should be met before installing equipment.

1) Temperature while operating should be between

40°F - 95°F

2) Relative humidity while operating should be between 15% < RH < 85%, Non-Condensed

3) Avoid locations where intense direct light is reflected off the LCD screen.

4) Avoid locations where strong static electricity can occur.

5) Avoid placing the product next to equipment that produce electromagnetic waves. It could

interfere with data transfer.

6) The floor must allow easy wheelchair access from the front or the side.

7) Space required for servicing the machine should be considered before installation.

Fig. 4.1 Installation space #1 (Plane view)

Summary of Contents for NH-1800






















































































































































































Search results

Summary of Contents for NH-1800

Reviews:

Nautilus NH-1800, Operator'S Manual, Page: 22 / 182

Search results

Summary of Contents for NH-1800

Reviews: