manualshive.com logo in svg

Nautilus E514c, Assembly Manual, Page: 31 / 38

Share
Download
Nautilus E514c Assembly Manual Download Page 31

31

CONSOLE SETUp MOdE

The Console Setup Mode lets you set the units of measurement to either English or Metric, change the machine type, or see 
maintenance statistics (Error Log and Run Hours – for service technician use only).
1.   Hold down the Increase button and Decrease button together for 3 seconds while in the Power-Up Mode to go into the 

Console Setup Mode.

 

Note:

  Push STOP to go back to the previous screen or the Power-Up Mode screen.

2.   The Console display shows the Units prompt. Push START/ENTER to start Units option. Push the Increase/Decrease 

buttons to change between “Miles-Lb” (Imperial English units) and “Km-Kg” (metric units).

 

Note:

   If the units change when there is data in User Statistics, the statistics convert to the new units.

3.  Push START/ENTER to set. For the next option, push the Increase button.
4.   The Console display shows the Machine Type prompt. Push START/ENTER to start Machine Type option. Push the 

Increase/Decrease buttons to change between ELLIPTICAL and BIKE.

5.  Push START/ENTER to set. For the next option, push the Increase button.
6.   The Console display shows the Brightness prompt. Push START/ENTER to start the brightness option. Push the 

Increase/Decrease buttons to change the backlight levels from 1 (lowest) to 5 (highest).

7.  Push START/ENTER to set. For the next option, push the Increase button.
8.   The Console display shows the Error Log prompt. Push START/ENTER to start Error Log option. The Error Log stores the 

last 10 errors (error type and system time of error), listed newest to oldest. Push the Increase/Decrease buttons to move 
through the Error Log. If there are no errors, the Console display shows “Index=0”.

9.  Push STOP to exit. For the next option, push the Increase button.
10.   The Console shows the RUN HOURS prompt. Push START/ENTER to see total hours and minutes for the machine.
11.  Push STOP to exit. For the next option, push the Increase button.
12.   The Console display shows the Units prompt again. Push STOP to go back to the Power-Up Mode screen.

Summary of Contents for E514c







































Reviews:

No comments