Nautilus E514c, Assembly Manual, Page: 26 / 38

26
Add User Profile
1. From the Power-Up Mode screen, push the My Nautilus
™
button and hold for 3 seconds to go to User Setup Mode.
Note: If no User Profile is set up, the Console will show the Name prompt for User 1. If a User Profile does exist, use the
Increase/ Decrease buttons to select Create User 2 and push START/ENTER.
2. The Console display shows the “ENTER NAME” prompt. Push START/ENTER.
3 Enter a name for the user. Use the Increase/Decrease buttons to move through the alphabet and blank space (found be-
tween A and Z). To set each letter, push the START/ENTER button. Push the STOP button to go back to the previous letter.
Push and hold the START/ENTER button for 3 seconds to complete the entry and go to the next data prompt.
4. The Console display shows the “AGE 30” prompt. Use the Increase/Decrease buttons to adjust the default value, and push
START/ENTER to complete the entry and go to the next prompt.
5. The Console display shows the “WEIGHT 150” prompt. Use the Increase/Decrease buttons to adjust the default value, and
push START/ENTER to complete the entry and go to the next prompt.
6. The Console display shows the “GENDER MALE” prompt. Use the Increase/Decrease buttons to adjust the default value,
and push START/ENTER to complete the entry and go to the next prompt.
Note: Due to screen limitations, “FEMLE” is the abbreviation for female.
7. The Console display shows the “CREATE CUSTOM YES” prompt. Use the Increase/Decrease buttons to move to the YES
or NO option. To start setup of your Custom Workout, go to YES and push START/ENTER.
To complete User Setup without a Custom Workout, go to the NO option and push START/ENTER. The Console goes
back to the Power-Up Mode screen.
Note: The Custom workout can be created at a later time by editing the User.
8. If you start the Custom Workout setup, the Program Display will show the left column (workout interval) is active by flashing,
with a default resistance level of 3. Use the Increase/Decrease buttons to adjust the resistance level of the active interval.
Push START/ENTER to record the resistance level. The next column to the right becomes active.
Note: The Console display shows the message “N of 20” during setup (N is the current interval). The maximum number of
intervals is 20.
Push and hold START/ENTER to complete the Custom Workout setup.
9. The Console goes back to the Power-Up Mode screen
User Profile Workout Program
1. From the Power-Up Mode screen, push the My Nautilus ™ button to go to User Selection Mode.
2. Use the Increase/ Decrease buttons to select a User Profile and push START/ENTER.
Note: If no User Profile is set up, the Console will go to the User Setup Mode.
3. VIEW STATS and WORKOUT. Use the Increase/Decrease buttons to choose an option, and push START/ENTER to
make your selection. The User Statistics option lets you see a summary of your workout data (see the User Statistics
section). The Workout option lets you select a workout profile program and begin a workout.
4. To workout, use the Increase(  ) or Decrease(  ) buttons to select one of the profile programs. Push START/ENTER to
select the profile program.
Note: The Custom workout will be one of the profile programs if setup.
5. Use the Increase(

) and Decrease(

) buttons to adjust the workout time. Push START/ENTER.
Note: The range of values for TIME is 5 - 99 minutes; the default value is 30:00.
6. Use the Increase(  ) and Decrease(  ) buttons to adjust the workout LEVEL.
Note: The range of values for LEVEL is 1 - 16; the default start value is 3.
7. Push the START/ENTER button to start the profile workout. The time will count down from the set time.