Nautilus Be Strong Commercial R916 Owner'S Manual Download Page 30 | Manualshive

Page: 30 / 52

Nautilus Be Strong Commercial R916 Owner'S Manual Download Page 30

30

Random Play Workout

The Random Play Workout is a program that randomly changes the intensity throughout the workout time.

1. Press the MORE WORKOUTS key. Then use the Level UP or DOWN keys to scroll through the

program options. When the console displays “RANDOM PLAY”, press [ENTER] to accept.

2. The console will then display “ENTER WEIGHT – LBS” (or “ENTER WEIGHT – KG” if in Metric mode).

Enter your weight using the numeric keypad and press (ENTER). Or, press [ENTER] to accept the
default value.

3. The console will display “ENTER LEVEL”. Enter the desired average intensity level using the numeric

keypad and press (ENTER). Or, press [ENTER] to accept the default value.

4. The console will then display “ENTER TIME”. Enter the desired time and press (ENTER). Or, press

[ENTER] to accept the default value.

5. The console will display “ENJOY WORKOUT” and the timer will begin.

Custom Intervals Workout

In the Custom Intervals workout, users can create a custom interval program by entering Rest Level and
Time, Work Level and Time, and total # of intervals.

To use the Custom Intervals Program:

1. Press the MORE WORKOUTS key. Then, use the Level UP or DOWN keys to scroll through the

program options. When the console displays “CUSTOM INTERVALS”, press [ENTER] to accept.

2. The console will then display “ENTER WEIGHT – LBS” (or “ENTER WEIGHT – KG” if in Metric mode).

Enter your weight using the numeric keypad and press (ENTER). Or, press [ENTER] to accept the
default value.

3. The console will display “ENTER WORK LEVEL”. Enter the desired intensity level using the numeric

keypad and press (ENTER). Or, press [ENTER] to accept the default value.

4. The console will then display “ENTER WORK TIME”. Enter the desired time and press (ENTER). Or,

press [ENTER] to accept the default value.

5. The console will display “ENTER REST LEVEL”. Enter the desired intensity level using the numeric

keypad and press (ENTER). Or, press [ENTER] to accept the default value.

6. The console will then display “ENTER REST TIME”. Enter the desired time and press (ENTER). Or,

press [ENTER] to accept the default value.

RANDOM PLAY PROGRAM

«
...
28
29
30
31
32
...
»

Summary of Contents for Be Strong Commercial R916





















































Reviews:

No comments