background image

 

  Operator Manual                                                                                                              Chapter3. For the beginning operator 
 

 

                                                                                       

©  2009 

Nautilus Hyosung Inc. 

All Rights Reserved.                                          3-13

 

Mode combination) by sequentially pressing those digits on the lock keypad. The 

numbers will be displayed on the LCD as they are entered. When the combination 
has been correctly entered, the LCD will read 

OPr

, meaning "

OP

en 

r

ight."   

 

3. OPr 

 Retract Bolt   

Turn the Dial to the right (CW) to retract the bolt 

 

4. Open Door 

 

5. Insert Change Key 

Insert the change key into the change key socket on the back of the lock. 

 

WARNING:   

Do not close the door.   

Leave the door open during this process until your are comfortable opening the lock 
with the new combination. 

 

6. Extend Bolt 

Turn the Dial to the left (CCW) to extend the bolt.   

 

7. Power Lock 

 

 

Turn the dial to the left (CCW) until 

  (the Change Key symbol along with 

Enter Combination) is displayed. 

 

8. 

 

 Press #8 

 EcF 

Press the “#” button followed by the “8” button. EcF (Enter current Factory 
combination) will be displayed 

 

9. EcF 

 Enter Current Shelved Mode Combination 

 EnF 

Enter the current shelved mode combination, “EnF” (Enter new Factory combination) 
will be displayed. 

 

10. EnF 

 Enter New Combination 

 Cnf   

Select and ente

r the new combination. “CnF” (confirm new Factory combination) 

will be displayed 

 

11. Cnf 

 Enter New Combination 

 POC 

Enter new combination again to confirm. POC (Pull Out Change key) will be 
displayed.   

 

WARNING:   

Record the new combination and store it in a secure place. If this combination is 
lost or forgotten, there is no alternate way to open the lock. 

 

12. POC 

 Remove Change Key 

 EOP 

Remove the change key. EOP (End Operation) is displayed. 

 

Summary of Contents for MX5300





















































Reviews: