![background image](http://html1.mh-extra.com/html/nautilus-hyosung/monimax5300/monimax5300_service-manual_3516485145.webp)
Service Manual Chapter9. User Handling Unit
© 2016
Nautilus Hyosung Inc.
All Rights Reserved.
9-3
Field Repair Scope (Recommendation)
▶
The user can check the communication cable, power cable, sensors, controller board,
and magnetic head cleaning state in the field. For other components, the user shall
inspect the modules at the depot level.
This is only a recommendation of Hyosung and can be changed depending on the field
situation or capacity of the technician.
#
Field Repair Item
Tool
Remark
1
Communication Cable
2
Power Cable
3
Sensor
A voltmeter
4
Controller Board
Screw driver, A
voltmeter
5
Magnetic Head
Cleaning
Cleaning card
In case card reader sometimes
can
’
t read card date of cardholder
Items not specified above cannot be inspected or repaired in the field. They shall be
replaced and inspected or repaired at the depot level.
Troubleshooting Procedure
▶
Troubleshooting Procedure
1. After arriving on site, check the fault and complaints with the branch personnel. Study
the fault in the module. For more information, see
“
Error Code and Troubleshooting
”
.
If the trouble is in the card reader, continue to Step 2.
2. Enter the supervisor mode on the operator panel, and check the status LED. Check if
the error is red in color and if an error code is displayed at the display. In case an
error code is displayed, compare the error code with the error code list in the manual
and identify the fault type.
3. If no error code is displayed, enter the Technician mode and initialize the card reader
or conduct a functional test in order to check whether a fault has occurred.
4. Determine if the error can be corrected in the field.
5. Take prompt measures if possible. Otherwise, replace the card reader.
6. When replacing a card reader, keep journal and log files.