3.
a. To use with Nikon F mount lenses, Mount
Adaptor FTZ is required to install on camera prior
to attach them on camera tray. For un- installment,
you have to reverse the steps.
b. To use with Nikon Z mount lenses, please rotate
the small lever CCW(in red circle) to vertical position,
it will let the Z lenses pass through and installed
on camera.
4.
Mount the camera by sliding the attached saddle
along the rail in the housing until it cannot go in
any further.
Note: Make sure the hotshoe plug cable is not
obstructed.
5.
Slide the hotshoe plug of the flash trigger PCB
into the hotshoe of the camera.
