10
PREPARATION FOR USE
Installing the Camera - housing tray attachment
1
4
2
3
unlock camera tray lever and
remove the tray from the housing
lock camera tray
*
place the zoom/focus knob in
place and make sure it is engaged
with lens gear
*
gently push the actuator of ON/OFF
lever downwards to make sure it is
engaged with the lever on the camera
attach the camera tray by tightening
the tray screw into the tripod socket
of the camera
place the actuator on the camera
tray in place and make sure it is en-
gaged with the focus mode swtich
on the camera
*
lift up actuator of ON/OFF lever each
time before installing the camera
*
make sure the ON/LOCK/OFF lever
is aligned with camera control before
sliding the camera into the housing
*
pull out the zoom/focus knob if
installing the camera with lens and
gear attached
slide the camera tray back into the
housing along the tray rail
* drawings as illustrations only
