15
5.
Install the camera by sliding the
attached saddle along the rail in
the housing until it cannot go in
any further.
Note: If installing the camera with
lens and gear attached, first pull
out the zoom/focus knob and sit on
the shallower groove
.
6.
Lock the camera into place by
turning the locking lever to the
“lock” position.
9.
Confirm that all the controls of the
housing are correctly engaged.
10.
For removal of the camera from
the housing, reverse the above
procedures.
7.
Gently push the ON/OFF lever
downwards ensuring the actuator
correctly engages with the
ON/OFF lever of the camera.
8.
Gently push the mode dial
downwards.
