10
PREPARATION FOR USE
Installing the Camera - housing tray attachment
1
4
2
3
unlock camera tray lever and
remove the tray from the housing
lock camera tray
*
place the zoom/focus knob in
place and make sure it is engaged
with lens gear
*
tilt the
fl
ip screen as shown
before screwing the camera into
the camera tray
attach the camera tray by tightening
the tray screw into the tripod socket
of the camera
*
pull out the zoom/focus knob if
installing the camera with lens and
gear attached
*
make sure the still/movie/S&Q
lever is aligned with camera control
before sliding the camera into the
housing
*
please refer to page 11 for port
installment
slide the camera tray back into the
housing along the tray rail
* drawings as illustrations only
