background image

19

WARRANTY

All NAUTICAM Housing Products and View

fi

 nders are 

warranted against any material and manufacturing 

defects for two years from the date of purchase for 

consumer use. NAUTICAM Optical Accessories are 

warranted against material and manufacturing defects 

for a period of one year, and HDMI cables carry a year 

warranty.

This warranty only applies to products purchased from 

authorized NAUTICAM dealers and does not extend be-

yond the original retail purchaser.

To return your product for service, please contact your 

regional authorized service center(s). Please note that 

this warranty only applies when the product is pur-

chased in the territory where the service center is lo-

cated.

NAUTICAM accepts no liability for any damage to and 

defects in the housing caused by improper use and/or 

poor maintenance; it is the responsibility of the own-

er to carefully follow the instructions in our manuals.

NAUTICAM does not hold responsibility for damage, of 

any nature, to any equipment used with and/or placed 

within our products.

NAUTICAM accepts no liability for any loss of captured 

images or the inability to capture images even if it is 

due to the malfunctioning of our products.

Unauthorized modi

fi

 cations and/or repairs of our 

products will automatically invalidate the warranty.

Summary of Contents for NA - A7IV























Reviews: