Current as of 2019-12-27
Instruction Manual for
Double Bayonet Holder for Ø 70
/
Ø 90 Float
Arm
PN# 72232, #72234, #72242, #72244
F
OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognize the
requirements of professional as well as amateur underwater
photographers and fulfill them through the innovative designs of our
products. We strive to achieve a high level of user-friendliness by
allowing stress-free installation and easy operation of all important
functions of the camera.
Please read this manual carefully before using the product, this will
maximize its performance as well as its lifetime.
W
ARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for
consumer use.
This warranty only applies to products purchased from
authorized NAUTICAM dealers and does not extend beyond the
original retail purchaser.
To return your product for service, please contact your regional
authorized service center(s). Please note that this warranty only
applies when the product is purchased in the territory where the
service center is located.
NAUTICAM does not hold responsibility for damage, of any nature, to
any equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning of our
products.
Unauthorized modifications and/or repairs of our products will
automatically invalidate the warranty.
*Remark: #72232 is used as an example in this instruction manual, other same
kind of products will be slightly different in term of appearance.
Place the bayonet holder and bracket around the float arm.
Align the bayonet holder by the two screws holes, and secure them
by tightening the 2x screws.
Example: SMC with bayonet adaptor on the bayonet holder
--- continue on next page ---
I
DENTIFICATION OF
P
ARTS
I
NSTALL
T
O
T
HE
F
LOAT
A
RM
Screws (2x)
Bayonet Holder (2x)
Allen Key
Lens Alignment ‘’I’’ mark
Lens Alignment Dot
Lens Release Button
