Current as of 2019-05-16
1.
Make sure the control knob is at its most outwards
position before mounting/ un-mounting the port. The
knob should be left at this position until making sure
that the lens and zoom gear is properly installed.
M
OUNTING THE
P
ORT TO THE
H
OUSING
Correctly aligned
2.
When properly installed, the lens should be perfectly
concentric with the port. If there is a slight misalignment,
check the position of the camera.
3.
Engage the gear by pushing in the knob, then turn the
knob for about 45° both ways to check if the camera
switch between normal mode and Macro mode.
Remark: Nauticam supports only e-manuals. Please download
corresponding product manuals on
website, or
contact us for e-manuals.
