20
It is required to reset the vacuum system when the vacuum level is dropped from target
level to totally lost. i.e. when opening the housing or changing port.
To reset
To reset
To reset
To reset when changing port/lens:
when changing port/lens:
when changing port/lens:
when changing port/lens:
1.
Release vacuum.
2.
Remove the port and lens from
the housing and camera.
3.
Press the BLUE button once to
reset the system. The LED light
will turn blue for five seconds then
it goes into flashing blue light
standby mode.
I
NSTALLING THE
C
AMERA
