11
PREPARATION FOR USE
* drawings as illustrations only
Setting up the housing - Zoom/Focus Knob
The housing is designed to maintain an easy access to the focus knob which is positioned as the top from left hand
controls and zoom knob at the bottom on the housing, this works using gear mechanisms that drive the gear set
attached to the camera lenses.
Majority of the camera lenses have the same ring feature, focus ring on the top and zoom ring at the bottom. But in
some cases (e.g. Canon EF-S 10-22mm f3.5-4.5 USM), both rings are arranged oppositely which will also result in the
housing.
Therefore, this housing also allows you to switch focus and zoom knob positioning in a few steps.
Focus Knob Gear Mechanism
Zoom Knob Gear Mechanism
1
3
2
4
unscrew the attached screw
* Before alternation, please
fi
rstly remove the camera tray.
fl
ip the part 180
0
and put it back in place
take out the gear connection part
tighten the screw
Please follow the steps for both focus & zoom knob alternation :
Summary of Contents for 16507
Page 18: ......
