Current as of 2019-04-09
M
OUNTING AN EXTENSION RING AND PORT ON THE HOUSING
3.
Insert the Iris gear on the Iris c-ring, then gently
push down the gear towards the bottom until it
cannot go any further as focus gear
To remove the gear set, reverse the above steps.
The tightness between the gear set and the lens can
be adjusted by removing or adding rubber grips on
either sides of the plastic c-ring. Spare rubber grips
are included in the package.
1.
Firstly mount the lens. Then plug a battery cable
before mounting an extension ring and a port.
2.
Confirm that the Extension Ring is unlocked, with
the locking lever pointing upwards as shown.
3.
Align the “o” mark on the port adaptor with the
“I” mark on the extension ring.
Gently push the port adaptor towards the
extension ring until it cannot go any further.
4.
Turn the port adaptor clockwise until the “o” mark
on the port adaptor aligns with the “o” mark on
the extension ring.
.
5.
Push the locking device inwards. Ensure that the
extension ring is securely locked with the port
6.
Before mount the extension ring and port adaptor
on the housing, unscrew the locknut of the port
adaptor only halfway.
*Inside has a white o-ring
