Fig.1a
3
4
2
2
6
1
1
5
Plug charger lead into
charge port
Connect to
mains power
supply
Fig.2
5
6
1. Handles
2. On/Off Triggers
3. LED Indicators
4. Charge Port
5. Charger
6. Charger Jack
Parts Diagram
Charging the Battery
Follow the safety cautions on page 9 to 10.
1. Plug the charger lead into Seascooter charger port (See Fig. 2).
2. Connect to mains power supply (See Fig. 2).
3. The LED indicators will light up RED while charging and GREEN when the unit is charged.
4. Charge times are as follows: 180 minutes for 100% charge – always charge the battery
fully for maximum duration.
5. The charger will get warm during charging – this is normal.
6. Disconnect the charger from the mains power supply, disconnect the charge lead from the
charge port.
7. Please note the unit cannot be operated whilst charging and please take care whilst
charging. Always charge under adult supervision.
8. When not in use unplug the charger and store the charger in a dry secure place.
- For the purposes of recharging the battery, only use the detachable supply unit
provided with this product.
- The transformer or power supply is not a toy.
- The instructions concerning persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge and children
playing with the appliance are not applicable.
- The connector must be removed before the appliance is cleaned and that the
appliance inlet must be dried before the appliance is used again.
- Detachable power supply part shall be provided with the part of class III construction
of the appliance.
- The transformers or battery chargers used with the product are to be regularly
examined for damage to the cord, plug, enclosure and other parts, and in the event
of such damage, they must not to be used until the damage has been repaired.
WARNING:
