62
("SPL" will blink on the display if the split time function is active.
Even though the stop watch is not on display, the timing will
continue to run internally.)
3. Press “Set” button again to see the timing of the second runner.
The stopwatch will switch to display the internal accumulated time
and continue timing of the second runner.
4. Press “Start/Stop” button to stop the timing of the second runner
and record the time.
5. Press “Set” button to reset timing.
TIMER FUNCTION
1. Press “Start/Stop” button to start the timer.
2. Press “start/Stop” button to stop the timer.
3. Press “Set” Button to reset the timer.
To set the Timer:
1. Press “Mode” button until timer mode appears.
2. Press and hold “Set” button to begin setting timer.
3. Press "Mode" button to select between hour or minute.
4. Press “Start/Stop” button to set the timer hour or minute.
5. Press “Set” button to exit the timer setting.
ELECTROLUMINESCENT BACKLIGHT
Press “Light” Button to activate the light function under each mode
anytime.
