24
CORRECTING STOPWATCH HANDS
If after resetting the stopwatch hands it is found that they are not at
the '12' or '0' position, correct them as follows:
1. Pull crown to “ C” position.
2. Press pusher “A” continuously, the stopwatch hand will advance
rapidly until it gets close to the “ 12” position. Then, press pusher
“A” repeatedly, the stopwatch hand will move by intervals until it
returns to “12” position.
3. Push crown back to “A” position.
4. Press pusher “A” to activate the stopwatch hand.
5. Press pusher “B” reset the stopwatch minute hand at 10 o’clock
until it returns to “0” position.
