Nautel XR6, Operation And Maintenance Manual

Page: 28 / 83

XR6/XR3 Operations and Maintenance Manual Operating the transmitter
Issue 3.1 2013-03-14 Page 2-3
• Fax: +1.902.823.3183
• Email: support@nautel.com
2. If the transmitter’s GUI functions normally when the power is turned on, and then the
CHECKSUM
error screen appears while changes are being made using the GUI, then it may
be possible to return the data stored in the EEPROM to a known condition by restoring the
factory settings (see
“Calibrating B+ thresholds and switching points” on page 2-25 ).
Hardware Settings warning
Whenever
Hardware Settings
is selected from the
General Settings
page, a warning screen displays
to remind you that modifying the hardware settings can affect system operation. If you really want to
change the hardware settings, press the
Continue
button to proceed. Otherwise, press the
Back
button to return to the
Main Menu
page.
GUI pages
Table 2.1 defines the available GUI pages.
Table 2.1: GUI Pages
GUI Page Function See Page
MainMenu Choose options and navigate to other pages. page 2-6
General settings Access general transmitter settings. page 2-10
Status View transmitter alarm status messages. page 2-7
Meters View meters showing operating measurements. page 2-15
Preset control Turn presets on and off. page 2-11
Preset edit Edit transmitter presets. page 2-11
Power Preset Schedule Set schedules for power presets. page 2-13
Events Log View a list of events. page 3-1
View Event View the details of an event from the events log. page 3-2
Clearing the Events Log Clear the list of events. page 3-6
Power Modules View status of RF modules. Select active RF
modules. Set auto module changeover. page 2-8