Nautel VX150, Installation Manual

Page: 55 / 86

VX150 TO VX2 INSTALLATION MANUAL UNBOXING AND INSTALLING THE TRANSMITTER
VERSION 0.3 2021-01-14 PAGE 1.9.1
SECTION 1.9: UNBOXING AND INSTALLING THE
TRANSMITTER
Unboxing the Transmitter
Before installing your VX150 to VX2 transmitter, perform the following steps:
1. Ensure that you have read and understood the planning requirements described in the previous
sections of this manual.
2. Inspect the shipping box for damage. Report any damage immediately to your Nautel sales
representative and the carrier.
3. Unpack the box. Remove all items from packing and place them on a suitable work area. Check
your packing list to make sure that you received all the components, including the VX150 to VX2
transmitter, the VX150 to VX2 Quick Start Guide, VX Series USB device (contains technical manual
set and unpacking/installation video) and ancillary kit.
4. Assemble your parts and tools. For a list of required tools, see “Parts and Tools” on page 1.12.1 .
5. When you are ready to install the VX series transmitter, proceed to “Mounting the Transmitter” on
page 1.9.2 .
NOTE
:
The VX150 to VX2 Quick Start Guide provides a more streamlined method to unpack, install and
commission your transmitter. If you used the Quick Start Guide to successfully commission your
transmitter, Nautel recommends you use the information in this Installation Manual to verify your
installation or for more in depth information, as required.
CAUTION!
FAILURE TO COMPLY WITH RECOMMENDATIONS MAY VOID YOUR
MANUFACTURER’S WARRANTY. FOR MORE INFORMATION, REVIEW YOUR
WARRANTY DOCUMENT
.