Nautel VS300, Operation And Maintenance Manual

Page: 194 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Issue 8.0 2016-03-01 Page 2-179
When you click in the Rules list, you have the option to edit or delete an existing rule, or to create a
new rule. Click the
New
or
Edit
button to display the
Rule Explorer
window (see Figure 2.152 on
page 2-178 ). Click
Delete
to remove a rule from the list.
Use the
Rule Explorer
window as follows:
• In the
Time of Year
section, set the start (From:) and end (To:) dates for the rule. Start to
end dates must be less than one year apart.
• In the Days section, select the days of the week on which the rule will apply.
• In the Time of Day section, set the start (From:) and end (To:) times (hours, minutes and
seconds) for the rule. Use the Repeat: field to establish a repeating cycle for the rule (e.g.,
every 24 hours).
• Use the drop-down menu to select the preset (e.g., Current Settings) for the rule. The
preset’s power, mode and frequency are displayed below the preset.
• Unless you edit other rules first, you cannot select a date that occurs before the start of
the previous rule or after the start of the following rule.
• Click the
Save
button to store the rule in the scheduler or the
Cancel
button to return to
the
Scheduler
page.
Enabling the Scheduler
You can enable or disable the scheduler using the remote AUI (see Enabling the Scheduler - AUI ) or
the local front panel UI (see Remote I/O Settings - Using the Front Panel UI on page 2-174 ).
Enabling the Scheduler - AUI
Enable or disable the scheduler by clicking the
Scheduler
button in the Date & Time section
(see Figure 2.153 ).
Figure 2.153: Enabling/disabling the scheduler - AUI