Nautel VS300, Operation And Maintenance Manual

Page: 189 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-174 Issue 8.0 2016-03-01
Remote I/O Settings - Using the Front Panel UI
To view the
Remote I/O
screen (see Figure 2.147 ) on the front panel display, select
User Settings ->
Remote I/O
from the
Main Menu
.
Figure 2.147: Remote I/O screen
Use the up and down buttons to select
Remote Inputs
(see Remote Inputs - Front Panel on page 2-
174 ),
Remote Outputs
(see Remote Outputs - Front Panel on page 2-175 ) or
Analog Outputs
(see
on page 2-176 ) to view or edit detail on the selected inputs or outputs.
Remote Inputs - Front Panel
Using the
Remote Inputs
screens (see Figure 2.148 ), you can configure up to 10 inputs that allow
you to remotely control various operational characteristics of the transmitter. Unless otherwise noted,
these inputs are only accepted by the transmitter if remote control is enabled. That setting can only be
made by a local user using the front panel UI.
Nautel sets remote input defaults prior to shipping. See the VS300 Pre-installation Manual for details.
Figure 2.148: Remote Inputs Screens (Input 1 shown)