Nautel VS300, Operation And Maintenance Manual

Page: 104 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Issue 8.0 2016-03-01 Page 2-89
Limiter Settings.
When you select
Limiter Settings
from the
Preset
editing options screen, you
can edit various limiter parameters (see Figure 2.68 ).
Figure 2.68: Limiter Settings menu
Use the up and down buttons to move the cursor to the desired limiter and then press the right
button to enter the associated sub-menu for:
•
Hard Limiter
(see Figure 2.69 )
•
AGC Limiter
(see Figure 2.70 on page 2-90 )
•
2-Slope Limiter
(see Figure 2.71 on page 2-91 ).
• L/R Limiter
(see Figure 2.72 on page 2-92 )
• MPX RMS Limiter
(see Figure 2.73 on page 2-93 )
Within a sub-menu, use the up and down buttons to move the cursor to the desired limiter setting
and then press the right button to enter the associated editing screen. Within any of the editing
screens, use the arrow buttons to edit or toggle a parameter value, noting the minimum and
maximum limitations indicated at the bottom of the display (as applicable). When complete, press the
accept (checkmark) button to save the change. Press the cancel (
X
) button to discard changes and
return to the previous menu.