Nautel VS300, Operation And Maintenance Manual

Page: 108 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Issue 8.0 2016-03-01 Page 2-93
Figure 2.73: MPX RMS Limiter sub-menu and editing screens
Mod Loss.
When you select
Mod Loss
from the
Preset
editing options screen, you can edit the
parameters related to an audio loss (see Figure 2.74 ).
Figure 2.74: Mod Loss menu
Use the up and down buttons to move the cursor to the desired mod loss menu item and then press
the right button to enable editing of the item.
Figure 2.75 shows all the editing screens for the
Mod
Loss
menu. Within any of the editing screens, use the up and down buttons to edit a parameter value,
noting the minimum and maximum limitations indicated at the bottom of the display (as applicable).
When complete, press the accept (checkmark) button to save the change. Press the cancel (
X
) button
to discard changes and return to the previous menu.
Use the up and down arrows to select ON or OFF, then press
the accept (checkmark) button to save the change. Press the
cancel (
X ) button to discard changes and return to the
previous menu. Default selection is OFF.
Use the up and down arrows to select a limit between -12
and 12 dBr, then press the accept (checkmark) button to save
the change. Press the cancel (
X ) button to discard changes
and return to the previous menu. Default limit is 0.0 dBr.