Nautel NX3, Installation Manual

Page: 10 / 70

NX5/NX3 INSTALLATION MANUAL PREPARING FOR INSTALLATION
PAGE 2.1.2 VERSION 3.1 2021-04-22
7. Review any assembly notes or instructions contained inside the transmitter crates. (For sites
requiring custom configurations, the instructions provided with the transmitter replace the
instructions provided here.)
8. Assemble your parts and tools. For a list of required tools, see “Parts and tools” on page 2.9.1 .
9. When you are ready to install the NX5/NX3 transmitter, follow the steps shown in Figure 2.1.2 on
page 2.1.2 .
Figure 2.1.2: Flowchart - Installing the transmitter
TIP When you have completed a task or step, put a check mark beside the step number.
CAUTION!
FAILURE TO COMPLY WITH RECOMMENDATIONS MAY VOID YOUR
MANUFACTURER’S WARRANTY. FOR MORE INFORMATION, REVIEW YOUR
WARRANTY DOCUMENT
.
Unpacking and Positioning - see page 2.2.1
Connecting the Station Reference Ground - see page 2.3.1
Installing Control/Monitor Wiring - see page 2.7.1
Commissioning Tasks - see page 2.8.1
Perform operational tasks:
“Commissioning” , “Modulation Checks” and “Going On-Air” , beginning on page 2.8.2
Connecting Ac Power - see page 2.4.1
Installing Audio Inputs - see page 2.6.1
Adjusting the Spark Gap - see page 2.5.1