NX10 INSTALLATION MANUAL
INSTALLING CONTROL/MONITOR WIRING
PAGE 2.7.2
VERSION 2.0 2016-05-06
6.
With the control/monitor cables near their destination, cut each wire to the required length and
install connectors, as necessary.
7.
Connect the control/monitor cable(s) to the appropriate connector(s) shown in
. Secure wires to the existing cabling and to the panel using arrowhead tyraps (Nautel Part #
HAC15) in the ancillary kit (see
to locate tyrap anchor hole locations).
See
“Configuring Remote Inputs” on page 2.7.5
to configure the external control input switching
circuits for single-ended (using the transmitter’s 15 V dc supply) or differential (using an external
dc supply).
8.
If you are using web based control for the transmitter, route an Ethernet cable to the control/
monitor PWB (A4).
9.
If the optional GPS Sync PWB is installed and you wish to synchronize the transmitter’s carrier
signal, install the GPS antenna and cabling in the selected location, then connect the cable to J2 on
the GPS Sync PWB. Secure wires to the existing cabling and to the panel using arrowhead tyraps
(Nautel Part # HAC15) in the ancillary kit (see
locations). Ensure the GPS Sync PWB is configured for the correct antenna voltage (5 V or 3.3 V, the
Nautel supplied antenna is 3.3 V) see
Figure 2.7.1: GPS Sync PWB Configuration for GPS Antenna
Part of GPS SYNC PWB (A8)
(E2 shown configured for Nautel
supplied 3.3 V antenna)
Configuration for
5 V antenna
(not supplied
by Nautel)
Configuration for
3.3 V antenna
(supplied by Nautel
when GPS Sync PWB
is purchased)
Summary of Contents for NX10
