Nautel NV5, Troubleshooting Manual

Page: 172 / 228

NV5/NV3.5 Troubleshooting Manual Reading Electrical Schematics
Page 5-4 Issue 3.2 2014-12-10
2. Follow the family tree branches to the block that contains the desired reference designation,
while noting the Nautel nomenclatures and names of all higher assemblies in the path.
Example:
A18 NAA56/01D RF Power Module > A18A10 NAPI104/03 Power Module
Interface PWB
.
3. Refer to Table 6.1 in Section 6, “Mechanical Drawings” on page 6-1 . Use the Nautel
nomenclature and name of each family tree block in the path, starting at the highest assembly
– this is normally Figure
MD-1
– to determine the figure number(s) for that assembly.
Example:
NAPI104/03 Power Module Interface PWB
is shown on
MD-16
.
4. Refer to the referenced figure (e.g.,
MD-16
) in Section 6.1, “List of Mechanical Drawings” on
page 6-2 to locate the desired part or assembly.
Note: The drawings in the
Mechanical Drawings
section depict the assembly detail of the
transmitter and its modules and assemblies.