NV5LT/NV3.5LT TROUBLESHOOTING MANUAL
RESPONDING TO ALARMS
PAGE 4.1.54
VERSION 3.3 2016-03-10
1.
Remove the transmitter’s front panel and upper, rear panel.
2.
From the front of the transmitter, remove the air blocker panel that is secured with four screws.
3.
From the front of the transmitter, disconnect the mating connectors (one ribbon cable and one N-
type) from the back of the reject load assembly.
4.
There are four M5 screws that secure the reject load assembly to the transmitter, accessible from
the front and rear of the transmitter. Remove and retain the two lower screws. Loosen the upper
screws that are in key slots; they do not need to be removed.
5.
From the front of the transmitter, remove the reject load assembly.
6.
Obtain a replacement reject load (Nautel Part # NAL14) and install by reversing the instructions in
.
7.
Summary of Contents for NV3.5LT
