Nautel NV20LT, Installation Manual

Page: 52 / 78

NV20LT/NV15LT INSTALLATION MANUAL COMMISSIONING
PAGE 2.9.4 VERSION 4.0 2018-02-26
Figure 2.9.1: First Time Setup Initial Screens
SET FREQUENCY
Press up/down arrows to adjust.
Defaults to 98.1 MHz.
Press checkmark to save and
continue. Press X to cancel.
SET OUTPUT POWER *** (see NOTE)
Press up/down arrows to adjust.
Defaults to minimum power level.
Press checkmark to save and continue.
Press X to cancel.
SELECT AUDIO SOURCE
Press up/down arrows to select AES,
MPX, Analog L/R or Audio Player. Press
checkmark to save and continue (see
Figure 2.9.2 on page 2.9.5
or
Figure 2.9.3
on page 2.9.6
). Press X to cancel.
*** NOTE:
Nautel recommends that you initially set the RF output power for a minimum
level and compare the transmitter performance to the Critical Parameter data (for minimum
power) provided with the Proof of Performance documents. When you have confirmed that
the critical parameter data is satisfactory, increase RF output power to rated power and
compare the transmitter to the critical parameter data for rated power (@ 98.1 MHz).