Nautel GV30N, Troubleshooting Manual

Page: 67 / 365

GV30N TROUBLESHOOTING MANUAL RESPONDING TO ALARMS
VERSION 0.1 2014-11-01 PAGE 4.1.59
Controller Replacement
Figure 4.1.21: Location of Controller Module
1. If possible, use the controller’s front panel UI and the remote AUI to record all custom user settings
including: network settings, preset/audio settings, user accounts, logs, SNMP configuration, email
configuration, time zone, notifications and playlists. It is recommended that all User Settings be
logged prior to replacing the controller module and then restored upon completion of the change.
2. Press RF Off. Turn off and lock out the transmitter’s main ac power.
3. Open the front door and remove the upper, rear panel.
4. From the rear of the transmitter, disconnect the mating connectors from the controller
module (A4).
M5 securing
hardware
Controller
Module A4
PARTIAL FRONT VIEW
(front doors open)
PARTIAL REAR VIEW
(panels removed)