NAUMANN NM12, Instruction Manual

Page: 4 / 24

4
5. Place the appliance on a flat and stable surface.
6. Check if the voltage indicated on the base of the appliance corresponds to the local voltage
before you connect the appliance.
7. Disconnect from the mains supply when not in use and before cleaning.
8. Never pull off the cable to disconnect it from the socket. Instead, unplug by pulling the plug
from the socket.
9. Thoroughly clean the parts that come in contact with food before you use the appliance for
the first time.
10. Never use your fingers or any other objects to push the ingredients down the feed tube while
the appliance is running. Only the pusher is to be used for this purpose.
11. Switch the appliance off before detaching or installing any accessory.
12. Wait until moving parts have stopped running before you remove any parts of the appli-
ance.
13. Do not attempt to grind bones, nuts or other hard items.
14. Never reach into the feeding tube. Always use the pusher.
15. Never operate the appliance continuously for more than 3 minutes.
16. If the appliance gets blocked press the Reverse button (R). The meat blocked in the feeding
tube will start moving to unclog the feeding tube.
17. Τhe use of accessory attachments, not recommended by Naumann, may cause hazards.
18. Do not let the cord hang over the edge of the worktop or touch hot surfaces.
19. The appliance is completely switched off only when disconnected from the mains supply.
20. Never immerse the appliance or its plug in water or any other liquid.
21. If the cord or any other part is damaged, you must immediately stop the use of the appliance
and contact the Naumann Service Centre for repair.
22. The partial or total non-respect of the safety instructions in the present instruction manual
will automatically release Naumann of any type of responsibility in case of malfunction of the
machine or injuries to persons or animals.
23. In case of manipulation, repairing or any modification of the machine made by unqualified
persons or in case of improper use, the guarantee will be automatically cancelled.
Keep this manual for future reference
INTRODUCTION
This appliance is equipped with an auto cut-off system. This system will automatically cut off the
power supply of the appliance in case of overheating.
If your appliance suddenly stops running:
1. Pull the mains plug out of the socket.
2. Press the ON/OFF button to turn off the appliance.
3. Let the appliance cool down for 60 minutes.
4. Put the mains plug into the socket.
5. Switch the appliance on again.
You should contact the Naumann Service Centre if the auto cut-off system is being activated
often.
If you plug the appliance, the indicator light will switch on.
CAUTION: The appliance is not intended to be operated by means of an external timer or
separate remote control system.
ENGLISH