Warning
•
For the sake of safety and in order not to void the warranty, service and repair of the device should be
carried out only by the equipment manufacturer or by service personnel at authorized workshops. In case of any
defects, make a detailed description of the defect(s) and contact your supplier.
Caution
•
Do not use a defective device.
6.1
Cleaning
There are no specific requirements to sterilization or disinfection of the device.
Cleaning the device
Make sure that the device is kept clean and free of dust:
•
Remove dust using a soft brush.
•
To clean the cabinet, use a soft, slightly damp cloth with a small amount of mild detergent on it.
Caution
•
Keep the unit away from liquids. Do not allow moisture inside the unit. Moisture inside the unit can
damage the instrument and it may result in a risk of electrical shock to the user or patient.
Adapters
If needed, remove any acoustic putty residue, and use an alcohol based wipe to clean the adapter.
7
Other references
For more information, refer to the Aurical FreeFit and the Probe Microphone Measurements Module Reference Manual
(English only)
For Otosuite installation instructions, see the Otosuite Installation Guide, on the Otosuite installation medium.
For more information, see the online Help in Otosuite, which contains detailed reference information about Aurical HIT
and the Otosuite modules.
8
Technical specifications
Type identification
Aurical® HIT is type 1082 from Natus Medical Denmark ApS.
Aurical HIT
17
7 Other references
Summary of Contents for Aurical HIT
Page 28: ...11 Manufacturer 28 Aurical HIT...