Disposal Instructions
Natus is committed to meeting the requirements of the European Union WEEE (Waste Electrical and Electronic Equip-
ment) Directive 2012/19/EU. These regulations state that electrical and electronic waste must be separately collected for
the proper treatment and recovery to ensure that WEEE is reused or recycled safely. In line with that commitment Natus
may pass along the obligation for take back and recycling to the end user, unless other arrangements have been made.
Please contact us for details on the collection and recovery systems available to you in your region at www.natus.com.
Electrical and electronic equipment (EEE) contains materials, components and substances that may be hazardous and
present a risk to human health and the environment when WEEE is not handled correctly. Therefore, end users also have a
role to play in ensuring that WEEE is reused and recycled safely. Users of electrical and electronic equipment must not dis-
card WEEE together with other wastes. Users must use the municipal collection schemes or the producer/importers take-
back obligation or licensed waste carriers to reduce adverse environmental impacts in connection with disposal of waste
electrical and electronic equipment and to increase opportunities for reuse, recycling and recovery of waste electrical and
electronic equipment.
Equipment marked with the crossed-out wheeled bin is electrical and electronic equipment. The crossed-out wheeled bin
symbol indicates that waste electrical and electronic equipment should not be discarded together with unseparated waste
but must be collected separately.
19
Warnings, Cautions, and Notes
This manual contains information, which must be followed to ensure the safe performance of the devices and software
covered by this manual. Local government rules and regulations, if applicable, should also be followed at all times.
Standards and safety-related issues relating to Hi-Pro 2 are comprised by the Aurical® Aud symbols, standards and warning
notes.
See
,
and
.
19.1
Connector warnings
Warning
•
Never mix connections between the Direct Connectors & Isolated Connectors
Direct connectors
•
All connectors within the red frame are connected directly to patient transducers.
Fig. 1
Sockets with direct connections to patient transducers - Aurical Aud connection panel
44
Aurical Aud
19 Warnings, Cautions, and Notes
