ALGO® 5 Newborn Hearing Screener Service Manual
P/N 000995 Rev.A
17
9. Install the Label Printer
•
Unpack the Label Printer. Unpack the USB cable for the printer from the accessories
box. Attach the USB cable into the Panel PC (FIGURE 20). Route the cable down to
the middle cart shelf, using the front or back U-channel of the cart column.
•
Route the power cable from the Label Printer power supply (see FIGURE 24) through
the middle opening in the cart column to connect it to the Label Printer on the middle
shelf. Connect the USB cable and the power supply cable into the Label Printer.
FIGURE 24: Routing Cable for Label Printer
•
The label printer is delivered with two Dual Lock strips adhered to the base of the
printer. Attached to each Dual Lock strip is a second strip to be adhered to the shelf.
Remove the backing from that second set of Dual Lock strips. Locate the printer in
the back right corner of the second shelf from the bottom (see FIGURE 25). Push
the printer with the exposed sticky side of the Dual Lock onto the shelf.
FIGURE 25: Placement of Label printer
Placement of
the printer
