4
Activating and Releasing the Parking Brake
The parking brake is activated by stepping on the foot lever (9). Afterwards, push the stroller
a few centimeters forward to ensure that the brake is engaged. Check whether the brake is
engaged – the back wheels of the stroller must be blocked. The parking brake is released by
pulling the foot lever (9) upward.
9
WARNING!
Before you put your child into the stroller or take your child out of it, always
make sure that the parking brake is activated.
WARNING!
Always check whether the back wheels of the stroller are blocked after you
activate the parking brake. Only let go of the stroller if you are certain that the parking
brake works.
WARNING!
The brake cables must not be bent – this can lead to brake failure.
5
Adjusting the height of the steering arm
Push the buttons on both sides of the steering arm for the height adjustment of the steering
arm (1) and move it to the desired position.
1
WARNING!
When you adjust the height of the steering arm, please beware of resulting
clamping points. They can cause injuries in a moment of distraction.
11
