8
Using the Seat Belt
1. Activate the parking brake (cf. section 4 on page 11) before you place your child in the
attachment.
2. Use the sliding buckles (15) to shorten or lengthen the belt, if required.
15
15
15
15
15
3. Push the tongues to open the belt and put your child in the stroller. Make sure that
the crotch strap (16) is looped around the lower eyelet on the centerpiece of the belt
(18) and that it is secured with the push button that is attached to the centerpiece of
the belt.
4. Secure your child with the belt. Place both tongues of the locking piece of the lap
belt (12) in the centerpiece of the belt (18). Hang the carabines of the shoulder straps
(17) in the eyelets on the locking piece of the lap belt. Adjust the belt with the sliding
buckles (15) and pull it tight.
18
16
12
12
17
17
5. Loop the crotch strap around the centerpiece of the belt (18) and fasten it with the
push button attached to it. Make sure that this pillow and the pillows on the shoulder
straps are properly positioned to prevent your child from having any pressure marks.
WARNING!
Use the safety belt as soon as your child can sit upright unaided.
WARNING!
Always use the crotch strap (16) in combination with the lap belt (12).
9
Mounting the Safety Bar
1. Put the safety bar (d) on the frame of the backrest.
2. Close the holder on both sides of the safety bar.
3. Place the bib over the safety bar and fasten it with the push button.
13
