https://www.naturewater.eu
Artikel 50801
Seite 3
08 2020-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
A.
short three way valve
B.
ball valve
C.
PP sediment filter cartridge with outer diameter 60mm for 5micron
D.
Post in line carbon filter
（
T33A
）
E.
RO membrane housing
F.
RO membrane
G.
Flow limit
H. Ball valve (for back-flushing, not illustrated)
Installing:
Please open three housings and then put three kinds of filter cartridge, PP, T33A and RO membrane
CTO into housings, and then tight the three housings
All other areas will use P.E pipe to connect
。
Please connect the short three way valve and ball valve to water tap.
Connection of the PE-line to the RO-Membrane:
The connections have three 3 seals:
BLUE (Sign: „To Faucet“): connection to water tap
BLACK (Sign: „To Drain“): connection to waste water
RED (Sign: „To Water Inlet“): coupling to water connection (inlet)
Back-flushing:
The pre-installed ball valve must be closed during normal filter operation. In order to rinse the
RO-membrane, the ball valve has to be opened so that the water pressure can rinse the mem-
brane.
Function of the filters:
Filter cartridge
function
lifespan
PP
Remove sand, salt, colloid and any other suspension whose
diameter is more than 5micron in water
3-6months
T33
To adsorb odour, chlorine and its outgrowth in raw water
6-12months
RO membrane To remove harmful soluble solid, bacteria and virus and other
impurities in raw water
1-2months
During mounting turn off the water.
If the osmosis unit is not used, turn of osmosis unit from the water mains.
