Nature's Comfort NC-40, Installation And Operation Manual

Page: 21 / 26

Page 21 / 26
Flue System: The stove and the flue system should be given a complete cleaning at the end of the heating season.
Remove exhaust intake covers and take off the venting pipe, clean dust from inside the pipes and elbows. Re-install and
ensure all joints are sealed.
Soot and Fly Ash: Formation and Need for Removal
– The products of combustion will contain small particles of fly ash.
The fly ash will collect in the exhaust venting system and restrict the flow of flue gases. Incomplete combustion, such as
occurs during startup, shutdown, or incorrect operation of the room heater will lead to some soot formation which will
collect in the exhaust venting system. The exhaust venting system should be inspected at least once every year to
determine if cleaning is necessary.
NC-40 Parts List
Item Title Part No. Qty.
1 Door Frame Assy. 5822-05-01-00 1
2 Ash Box 5822-01-01-13 1
3 Burn Pot Frame 5822-01-15 1
4 Burn Pot 5822-01-16 1
5 Burning Room Cover 5822-08 1
6 Air-Out Grid 5822-01-02-00 1
7 Lower Grid 5822
－
01-01-04 1
8 Ash Cleaner Rod 5822-07-00 1
9 Ash Cleaner Rod Handle 5822-01-10-00 1
10 Heat shield Diverter 5822-01-03 1
11 Right Wall Hinged Panel 5822-03-00 1
12 Right Wall Panel 5822-03-01-03-02 1
13 Left Wall Hinged Panel 5822-03-01-03-01 1
14 Left Wall Panel 5822-06-00 1
15 Stove Body 5822-01-06 1
16 Top Panel Assy. 5822-01-05 1
17 Hopper Handle 5822-01-07 1
18 Micro Switch Mount-1 5822-01-17 1
19 Micro Switch Mount-2 5822-01-11-01 1
20 Micro Switch 5822-01-11-02 1
21 Convection Blower Assy. 5822-01-13 1
22 Igniter 5822-01-14 1
23 Exhaust Blower Assy. 5822-01-12 1
25 125°F(52°C) Sensor 5822-11-00 2
26 Exhaust Blower Box 5822-01-18 1
27 Exhaust Maint. Cover 5822-02-12 2
28 Air Intake Damper 5822-01-01-11-00 1
29 Foot Screws 5822-01-09-00 4
30 Control Panel 5822-01-08 1
31 Hopper Heat Shield 5822-02-06 1
32 200°F(93°C) Sensor 5822-01-04-01 1
33 Hopper Frame 5822-02-01-00 1
34 L&R Wiring Guide Rail 5822-10 2