NRC-6-SV
Room Thermostat and Remote Control Module
How to turn on/off the burner:
By pressing the ON/OFF button, you will be redirected to a menu where you can choose a
Switch Mode
.
Using the buttons “
▲
“ or“
▼“
will move the red marker line up/down. You can choose
between three working modes:
On
,
Standby,
and
Timers
. While the red marker is over an
option, pressing the ON/OFF button again will make a selection from the menu. If you don’t
press a button for more than 5 seconds or if you press the left navigation button (◄), you can
leave without making an
y mode selection or a burner state change. T
he “fuel type” field of the
main screen gives information about the chosen fuel settings for the present operation of the
burner. If this field is missing, that means that the burner is switched off or it is scheduled to
be turned off later. The most certain indication that the burner is now working is if there is no
green text at the bottom row of the screen. Some of the operation phases of the burner that
could be presented in green can be seen below in Table 1:
Table 1.
Work phase
Work phase
1
Cleaning
6
Power level P1
2
Feeding
7
Power level P2
3
Ignition
8
Power level P3
4
Unfolding fire
9
Intermediate Clean
5
Maintenance
10
Extinguishing
p.8 /21
Currently selected row
