NRC-6-SV
Room Thermostat and Remote Control Module
Information about the state of some of the current parameters
By pressing the right button (
►
) while the controller is still in the “
Pellets consumption
”
screen, the controller switches to an “
Information
” screen. It provides data about the boiler’s
set temperature, the DHW's temperature, the
level of illumination measured by the photo
sensor, the temperature of the exhaust gases, the boiler’ s temperature, and the total pellet
consumption since the last reset was performed.
By pressing and holding the menu button for more than 2 seconds, the total pellets consumption
number is being reset. However, the time and date of the reset is being saved, which means that you
will be able to track how much your pellet consumption has been, since the last reset.
User Manual Ver 3.3
p.11 /21
Indicator for
the next page
Date format
dd/mm/yyyy
