Pressing the F button one more time enters the Initial settings menu:
To change the initial settings, use the following instructions:
•
the field which is going to be changed is blinking
•
process to the next field of the same parameter by pressing
↵
button and it will start
blinking
•
increase the value of the blinking field by pressing the button
▲
and decrease it by
pressing the button
▼
•
pressing the F button saves the changes and forwards to the next parameter, if any, or
to “Water heater Off” mode.
NHC-H42-2 Reference Manual ver 1.6
стр. 18 / 18
Heater's power
Presence of
an anode protector
