Check for damaged parts before each use. Replace damaged or worn parts immediately. Never
use
the solar panel
with a damaged part.
Check that the panel, battery clamps and other parts are clean to ensure proper function.
If
necessary,
wipe the components with a damp cloth – DO NOT use soap or solvents when cleaning
and DO NOT
pour chemicals on the panel.
Property
Specification
Maximum
Power
Up to
22
Watts
Current at Pmax
1300
mA
Solar Panel Type
Amorphous
Measurements
Weight
5.
6
lbs
Voltage
at Pmax
18V
30
x12.
9
x 0.8 in
Technical Specifications
Before Each Use
1
Solar Panel
2
SAE to
Battery Clamps
C
able
3
S
tand
P
oles
Part List
4
8Amp Charge Controller
Qty
Description
No.
1
1
2
1
Property
Battery Voltage System
Cut-in Voltage
Cut-out Voltage
Specification
12V Only
13V
14.2V
Observe manufacturer’s safety procedures when working around batteries and other electrical
equipment.
Always connect charge controller to the battery first and remove last.
This product is designed to be used on 12 volt
battery.
This product is designed to receive charges from 12 Volt Solar Panels.
This product should be placed in a well ventilated dry area, free from flammable gases,
weather, and moister. Charge controller is NOT weatherproof.
LED light indicates a full battery charge "green" at 14.2
Volts, at this time the charge controller will cut out to
prevent overcharging.
LED light indicates battery charging "yellow" when
battery reaches below 13 Volts, charge controller will cut
in and allow solar panel to being charging.
Charge Controller
Page
3
of
4